The thermoplastic polyurethane elastomer is referred to as TPU, and the t-shirt dtf printer distributor is manufactured by heating and melting TPU particles. The production process mainly includes film coating, hot melt scraping coating and so on. t-shirt dtf printer distributor is a very important type of hot melt film. The raw materials of t-shirt dtf printer distributor are compared with the hot melt film of PA, PES, EVA, EAA and other materials. There are many types to choose from and different uses. The following is a systematic introduction to some application examples of t-shirt dtf printer distributor.

Characteristics of TPU

Tpu hot melt adhesive has the characteristics of good washable and dry cleaning resistance, high temperature resistance up to 130 degrees, low temperature resistance of minus 30 degrees, with good tensile properties.

Application 1: Application of seamless wall fabric backing glue

At present, the hot melt adhesive used for the seamless wall cloth back adhesive is mainly hot melt adhesive film of eva material, but the shortcomings of eva hot melt adhesive film are very obvious, although the melting point of 80 degrees is relatively low, it is still difficult for the seamless wall cloth to handle the corner position of the paste; The melting point temperature of tpu low-temperature hot melt film is lower than that of eva hot melt film, which is more convenient to handle the corners of seamless paste. JT-5016H of Jintang Technology is more widely used, with large melting finger and low melting point. The crystallization speed is fast, the cohesion strength is large, and it is not easy to be brittle and has certain toughness.

Application 2: Composite application of pvc materials

It is recommended to use tpu material type of hot melt film for Pvc and non-woven materials. In addition to the composite of pvc and non-woven fabrics, pvc flooring and pvc wallboard can use t-shirt dtf printer distributor as a composite adhesive.

Application 3: Composite application of leather and sponge

The composite of leather and sponge is generally recommended to use pa and tpu types of hot melt adhesive omentum, if the flexibility requirements are relatively high, the use of tpu hot melt adhesive omentum effect will be better!

Application 4: Application of shoe material composite

Shoe material field is one of the important application areas of t-shirt dtf printer distributor. The demand of shoe material industry for t-shirt dtf printer distributor is mainly based on the low-temperature release film hot-melt adhesive film, such as the vamp composite and the insole composite.

t-shirt dtf printer distributor https://www.suzhoulongterm.com/60cm-t-shirt-printing-4heads-I3200-dtf-printer-with-heating-machine.html