Safety management system for dust and poison prevention in the factory _ production

Reacties · 1021 Uitzichten

Original title: Running 10: Zhou Shen challenges the Olympic champion, contracts the whole period to watch,

Original Title: Safety Management System for Dust Prevention and Gas Prevention in Factories In order to earnestly implement the Law of the People's Republic of China on the Prevention and Control of Occupational Diseases, do a good job in dust and poison prevention, ensure the occupational health and safety of employees in dust and poison positions of the Company, effectively prevent and avoid the occurrence of occupational hazards, and improve the labor health conditions of the Company, this system is specially formulated. 1. Scope of application: This system is applicable to the safety management of dust prevention and gas prevention in each production workshop. II. Relevant documents and reference standards Production Safety Law of the People's Republic of China (Order No.70 of the President of the People's Republic of China) Law of the People's Republic of China on the Prevention and Control of Occupational Diseases (Order No.60 of the President of the People's Republic of China) Regulations on the Safety Management of Hazardous Chemicals (Decree No.493 of the State Council) General Specification for Safety Standardization of Hazardous Chemicals Practitioners (AQ 3013-2008) Warning Signs for Occupational Hazards in the Workplace (GBZ158-2003) III. Responsibilities 1. Responsibilities of Safety, Environment and Quality Supervision Department 1 Be responsible for the supervision and inspection of the allocation and use of protective articles for all dust and toxic posts. 2 Be responsible for supervising the trade union's regular inspection of dust and toxic posts and the physical examination of employees. 3 Be responsible for the training and education of employees on dust prevention and gas prevention. 4 Be responsible for preparing the annual dust-proof and anti-virus plan and incorporating it into the annual safety technical measure plan. 2. Responsibilities of the trade union 1 Be responsible for the regular testing of the company's dust and toxic posts and the physical examination of employees. 2 Be responsible for supervising the production department's treatment of dust and toxic hazards existing in the operation site. 3. Responsibilities of Production Department Expand the full text 1 Be responsible for the maintenance of various production facilities on the operation site, and put an end to the phenomenon of running, emitting, dripping and leaking. 2 Be responsible for the technical transformation of the process that produces dust and toxic substances and the inspection and treatment of dust and toxic hidden dangers. 3 Be responsible for giving priority to the use of advanced technology and equipment to improve the level of sealing, mechanization and automation in the production process. 4 Cooperate with the Safety, Environment and Quality Supervision Department to prepare the annual dust and gas prevention plan, and implement the dust and gas prevention plan. 4. Responsibilities of production workshop 1 Be responsible for the maintenance of various production facilities on the operation site, and put an end to the phenomenon of running, emitting, dripping and leaking. 2 Be responsible for the secondary and tertiary training and education on dust prevention and gas prevention for employees. 3 Be responsible for the investigation and treatment of dust and toxic hazards in the area under its jurisdiction. 4 Be responsible for the maintenance, scrapping and updating of the dust-proof and toxic-proof appliances configured in the jurisdiction area. IV. Basic principles of dust prevention and gas prevention 1. The dust-proof and anti-gas facilities in the construction project must conform to the national standards, and must be designed, constructed and put into production and use simultaneously with the main project. 2. Leaders at all levels of the company shall earnestly put the dust prevention and gas prevention work on the agenda, and plan, arrange, inspect,KN95 Face Mask with Five Layers, summarize and evaluate the gas prevention and dust prevention work at the same time when planning, arranging, inspecting, summarizing and evaluating the production work. 3. It is necessary to conscientiously do a good job in dust and poison prevention, take comprehensive measures to eliminate dust and poison hazards, constantly improve working conditions, ensure the safety and health of workers, and achieve safe and civilized production. 4. Every year,Antivirus Disposable Mask with CE Certificate, the company shall arrange the dust prevention and gas prevention plan and the funds, equipment and equipment for the technical measures taken together with the production plan, and include the gas prevention and dust prevention measures plan in the technical measures plan and the financial and material plans for practical guarantee. V. Protection and Treatment 1. Limit the use of toxic and harmful materials, prevent the leakage and diffusion of dust and poisons, keep the workplace in line with the national health standards, and take effective protective measures to reduce the contact between personnel and dust and toxic materials. 2. For the production process of toxic and harmful substances, airtight equipment and isolation operation shall be adopted, non-toxic or low-toxic substances shall be used to replace toxic materials, and the process shall be innovated to realize mechanization, automation and continuity. 3. For all operations with dust, wet operation and isolation operation must be actively adopted to reduce the contact between personnel and dust toxic materials. Operation shall not be carried out without the above treatment. 4. The management of natural ventilation and mechanical ventilation must be strengthened at all workplaces with dust and toxic substances, so as to keep the content of toxic substances in the air of the workplace below the maximum allowable concentration stipulated by the state. Through the absorption, adsorption and separation of purification equipment, the concentration of harmful substances in the air is reduced. 5. In the production process, the toxic and harmful substances emitted, such as waste gas and waste water, Medical Quickly Delivery Antivirus Coverall ,Against Bacteria Breathable KN95 Face Mask, shall be recycled and purified, and shall not be discharged at will without qualified treatment. 6. For the process equipment that is easy to leak or emit toxic gas and liquid, it is necessary to strengthen the planned maintenance, improve the maintenance quality, strictly control the running, emitting, dripping and leaking, strengthen the management of the detoxification and dust prevention, ventilation and exhaust devices, and do a good job in maintenance. Without the approval of the production or safety and environmental protection deputy general manager, it is not allowed to move or dismantle them without authorization. 7. When repairing the equipment, pipelines and containers with toxic and harmful substances, the company's Safety Inspection and Maintenance Management System shall be strictly implemented. 8. During the review and acceptance of the design, construction and completion of the new, expanded and modified projects, if it is found that they do not meet the requirements of dust prevention and gas prevention, they shall be reworked, otherwise they shall not be accepted and put into production. 9. The safety distance between the production area and the living area shall comply with the safety distance regulations. Except for the duty room, no personnel shall be arranged to live in the production area, and non-production personnel shall not enter the production area at will. 10. Strengthen the regular monitoring of dust, poison and other pollutants in the production area, rectify the problems and hidden dangers found in time, and take preventive measures for those that cannot be rectified temporarily. 11. For the post with dust and poison operation, the site shall be equipped with special cabinets for protection and first-aid equipment, equipped with sufficient dust-proof and gas-proof equipment, and the number of dust-proof and gas-proof masks and filter tanks shall exceed the number of production personnel on duty in each shift. 12. Departments at all levels shall strengthen the management and maintenance of the equipped dust-proof and anti-gas appliances, and the management personnel at all levels shall regularly check and update them, and mark them in time to prevent failure. 13. The production workshop (post) with corrosive toxic substances or toxic substances that can be absorbed by the skin must be equipped with applicable protective equipment, first-aid medicines and emergency facilities (such as eye washer, shower and other shower facilities). 14. The post personnel shall be trained to understand the structure, understand the principle, understand the performance, be able to use, maintain and deal with faults. 15. The packaging of toxic and harmful substances must meet the safety requirements, and leakage and diffusion shall be strictly prevented during storage and transportation. There must be safety labels outside the packaging. 16. Domestic water and steam must be completely separated from production water and steam to prevent toxic substances in the production system from entering the domestic water and causing personnel poisoning. 17. Poisonous monitoring alarm shall be set at relevant poisonous and harmful posts. 18. Ensure the implementation of the dust-proof and anti-virus management system, educate the staff to strictly abide by the rules and regulations, and commend and reward those who have made outstanding contributions to the dust-proof and anti-virus work. VI. Organization and Rescue 1. The company has set up an acute poisoning leading group headed by the deputy general manager in charge. Its members are composed of supervisors of departments and workshops of the company. 2. The company shall provide necessary first-aid equipment and medicines for the main posts, and the company's infirmary shall be responsible for the rescue of poisoned personnel or establish a joint rescue agreement with medical institutions. 3. At night, take the horizontal shift of chemical production as a unit, the company's on-duty personnel and the company's dispatcher shall set up an on-site rescue team and promptly notify the deputy general manager in charge and the leaders of the general manager's office, production department (equipment, electrical), safety, environment and quality supervision department and other relevant departments to come to the scene. And notify the surrounding workshops in the factory to make corresponding emergency preparations and measures. 4. After the occurrence of a trace leakage poisoning accident, the post personnel shall immediately wear protective equipment, remove the poisoned personnel from the toxic area, and send them to the infirmary or the medical institution designated by the company for rescue. In case of major leakage and personnel poisoning, the post personnel shall first report to the company dispatcher, wear protective equipment,Quickly Delivery Disposable Protective Clothing, organize personnel to rescue and move to the upwind direction. 5. After receiving the alarm, the company's dispatcher shall immediately start the company's Emergency Rescue Plan for Poisoning Accidents. 6. If the personnel are not evacuated, the personnel participating in the emergency rescue shall wear air respirators and chemical protective suits for emergency rescue (but more than two persons must enter the toxic area and keep in touch with each other). 7. Emergency measures for rescue of acute poisoning shall be implemented in strict accordance with the specific requirements in the Regulations on Emergency Measures for Rescue of Acute Poisoning in Chemical Enterprises. Return to Sohu to see more Responsible Editor:. zjyuan-group.com

Reacties